Comware

 View Only
Back to discussions
Expand all | Collapse all

UPlink from 4108g module (J4908a) to 4108g (J4863A)

This thread has been viewed 0 times

  • 1.  UPlink from 4108g module (J4908a) to 4108g (J4863A)

    Posted Nov 17, 2004 02:23 AM
    When I try to connect cat5 X-over from a port in the J4908A 20 port 10/100/1000 to another 4108g with a J4863A 6 port 10/100/1000.
    To create an uplink the connection fails.
    Both prots work if connected to a server.
    Both ports are set to Auto.

    If I use a 100fx port on the switch connected to the 20 port 10/100/1000 I get a 100Mb uplink

    S/w is vewr 7.50


  • 2.  RE: UPlink from 4108g module (J4908a) to 4108g (J4863A)

    Posted Nov 17, 2004 09:35 AM
    I would expect the ports to support Auto-MDIX so a straight-through jumper should be used instead of a crossover. Personally, I would use certified CAT6 jumpers.


Related Content