Wireless Access

 View Only
Back to discussions
Expand all | Collapse all

using WPA3 personal disables the network

This thread has been viewed 11 times

  • 1.  using WPA3 personal disables the network

    Posted Jun 24, 2024 04:37 AM

    Hi,

    when I switch a wireless network to use WPA3-Personal instead of WPA2-Personal, clients (like an Android phone) no longer detect the SSID and can not connect.

    This is with firmware version 8.6.0.24 on IAP-215 access points.  How would I get WPA3-Personal to work?



  • 2.  RE: using WPA3 personal disables the network

    Posted Jun 24, 2024 05:31 AM
    Edited by HR-abaef5 Jun 24, 2024 05:33 AM

    That may be for clients that don't support WPA3-Personal (SAE), as it's not backward compatible with WPA2-Personal (PSK).

    Could it be that you disabled transition mode on the SSID (opmode-transition)?

    The Instant AP-215 does not support WPA3-SAE: The WPA3 opmodes are effective only on the 300 Series, 303 Series, 310 Series, 320 Series, 330 Series, 340 Series, AP-365, AP-367, 370 Series, 510 Series, 530 Series, and 550 Series access points. Other access points will reject these opmodes.

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------



Related Content