Comware

 View Only
Back to discussions
Expand all | Collapse all

v1910 inter routing

This thread has been viewed 1 times

  • 1.  v1910 inter routing

    Posted Nov 21, 2013 10:55 PM

    Hi

     

    I got some old HP switches to test and that include a v1910-48G.

     

    I created 2 VLANs: VLAN10 and VLAN20. Vlan interfaces are 192.168.10.99 and 192.168.20.99 respectively.

    Default VLAN1 is 192.168.2.99

    Gateway is 192.168.2.1

     

    IP4 routing Table as follow

     

    Destination IP Address         Mask       Protocol     Preference    Next Hop    Interface
    0.0.0.0                   0.0.0.0            Static            10            192.168.2.1    Vlan-interface1
    127.0.0.0      255.0.0.0            Direct            0               127.0.0.1    InLoopBack0
    127.0.0.1      255.255.255.255    Direct            0            127.0.0.1    InLoopBack0
    192.168.2.0      255.255.255.0            Direct            0            192.168.2.99    Vlan-interface1
    192.168.2.99      255.255.255.255    Direct            0            127.0.0.1    InLoopBack0
    192.168.10.0      255.255.255.0            Direct            0            192.168.10.99    Vlan-interface10
    192.168.10.99      255.255.255.255    Direct            0            127.0.0.1    InLoopBack0.

     

    But I cannot ping the hosts at vlan 10 and vlan 20 . IPs are 192.168.2.200 GW 192.168.2.99 and 192.168.10.200 GW 192.168.10.99.

     

    Please advice and thanks .

     

    D2G

     

    P.S. This thread has been moved from LAN Routing to Web and Unmanaged. -HP Forum Moderator

     


    #intervlan


Related Content