Wireless Access

Hi , 

I setup a Aruba IAP 4 years back and that was buttery smooth experience. 

after these many years, involved in deployment and this was very awful. 

Aruba AP 635
Firmware version 8.10
Virtual Controller based. 

topology: Core <--> Access <--> APs

to the same access switch, 3 qty of AP12 were connected. 

When accessing an application  the AP635 takes more than 5 minutres to load whereas the other APs takes 10 seconds. 
With lan also below 10 Seconds. 

We isolated it not as a lan side issue but wireless only. 
And it works well with AP12 models. 

I would like to know is there any specific settings Aruab virtual controller that alters the speed in WiFi.

What clients are you using?
What application are you testing that takes 5 minutes?
Are clients connecting on the 5ghz?  What is your channel width?

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

HPE Design and Deploy Guides: https://community.arubanetworks.com/support/migrated-knowledge-base?attachments=&communitykey=dcc83c62-1a3a-4dd8-94dc-92968ea6fff1&pageindex=0&pagesize=12&search=&sort=most_recent&viewtype=card
------------------------------

Original Message:
Sent: Jul 19, 2022 11:46 AM
From: Sampath Poodari
Subject: Very Slow Network with Aruba AP635

Hi , 

I setup a Aruba IAP 4 years back and that was buttery smooth experience. 

after these many years, involved in deployment and this was very awful. 

Aruba AP 635
Firmware version 8.10
Virtual Controller based. 

topology: Core <--> Access <--> APs

to the same access switch, 3 qty of AP12 were connected. 

When accessing an application  the AP635 takes more than 5 minutres to load whereas the other APs takes 10 seconds. 
With lan also below 10 Seconds. 

We isolated it not as a lan side issue but wireless only. 
And it works well with AP12 models. 

I would like to know is there any specific settings Aruab virtual controller that alters the speed in WiFi.