Wired Intelligent Edge

 View Only

  • 1.  VLAN Translation on 2920-48G

    Posted Apr 18, 2015 02:53 AM

    Hi

    Is it possible to translate a VLAN tag on a specific tagged Port to another VLAN tag with the proCurve 2920 switch?

    If no, which switch has this capability?

     

    Thank you for your Answer!

    Cheers NetBlizzard



  • 2.  RE: VLAN Translation on 2920-48G

    Posted Apr 19, 2015 09:01 PM

    The way I would bridge two VLANs would be to patch two untagged ports to each other, with each of the two facing ports configured with a different VLAN.



  • 3.  RE: VLAN Translation on 2920-48G

    Posted Apr 20, 2015 02:54 AM

    Yes, this was also my first idea.

    But i would solve it on the switch device, without this "silly loop cable" :)



  • 4.  RE: VLAN Translation on 2920-48G

    Posted Apr 20, 2015 03:01 AM

    QoS allows you to classify frames based on the 802.1q header and re-write 3 bits inside that header, but the bits involved are the ToS bits, not the VLAN ID bits.

     

    I don't think you can do it.



  • 5.  RE: VLAN Translation on 2920-48G

    Posted Apr 20, 2015 03:03 AM

    OK, thank you. 

    Yes, the QoS bit is not the VLAN bit. :)

    You know, is there a HP switch with VLAN Translation support?

     

    Cheers



Related Content