Comware

 View Only
Back to discussions
Expand all | Collapse all

VLAN + Trunk on v1910 & 3Com 2928

This thread has been viewed 0 times

  • 1.  VLAN + Trunk on v1910 & 3Com 2928

    Posted May 10, 2013 04:38 AM

    Hey guys,

     

    i have the following setting & stuck in the vlan-config:

     

    1 HP v1910-24G Software Release 1513P15

     

    1 3Com 2928-SFP Plus Software Release 1513P15

     

    both are connected via fiberglass (2 GBics on each switch). the GBic Ports on each switch are in a link aggregation brigde. no vlan at all, all porta in access-mode.

     

    now i try to setup a vlan & send it across the fiberglass.

     

    ich tried to set up it in the following way (on both switches):

     

    1. created a vlan, ID 2

    2. untagged member GE1/0/1

    3. changed link mode on the Bridge-Aggregation-Group to trunk

    4. tagged Bridge-Aggregation-Group with VLAN-ID 2

     

    now i lost connection between the switches.

     

    can you help me?

     


    #VLAN


Related Content