Wired Intelligent Edge

Hi,

We are unable to make Vrrp mode owner and command is not taking ..Can any one guide me is there any other command in HP 5412R

HP-Switch1-5412Rzl2# show vrrp vlan 32 vrid 32 config

 VRRP Virtual Router Configuration Information

  VLAN ID : 32

  Virtual Router ID : 32

  Administrative Status [Disabled] : Enabled

  Mode [Uninitialized] : Backup

  Priority [100] : 254

  Advertisement Interval [1] : 1

  Preempt Mode [True] : True

  Preempt Delay Time [0] : 0

  Respond To Virtual IP Ping Requests [Yes] : Yes

  Version [2] : 2

  Null authentication compatibility [False] : False

  Primary IP Address : Lowest

HP-Switch1-5412Rzl2(vlan-32-vrid-32)#  owner

Invalid input: owner

HP-Switch1-5412Rzl2(vlan-32-vrid-32)#

Even after reconfiguring the vrrp in 5412r switch in both switch 1 & switch 2 i am facing the same issue.

In both the switch the vrrp mode is showing backup and there is no command to make switch1 vrrp owner.

You have too many VRIDs.

My approach would be to have one VRID per (potential or actual) STP topology.
And/or one VRID per security Zone.