Wired Intelligent Edge

I tried many times to do VSF stacking with SFP28 cable.
Before I did two swtiches were in factory state.
Mobile app can be discovered the neightbor then choose as Secondary.
Next step is configuring state but error immediately pop-up partial configuration.
Sometime it is unable to find each other with Member not in factory defualt state.

AOS-CX is the latest verion

PS.I did Factory reset by press and hold reset button more than 5 seconds and in CLI, enter command "erase startup and boot system"

------------------------------
Ratchapas Shatsa-Nga
------------------------------

Good day!

Can you please provide screen shot of the issue?
latest version 10.6.1xx?


------------------------------
Yash NN
------------------------------

Original Message:
Sent: Feb 14, 2021 10:57 PM
From: Ratchapas Shatsa-Nga
Subject: VSF issue with pair of 6300M on CX Mobile app

I tried many times to do VSF stacking with SFP28 cable.
Before I did two swtiches were in factory state.
Mobile app can be discovered the neightbor then choose as Secondary.
Next step is configuring state but error immediately pop-up partial configuration.
Sometime it is unable to find each other with Member not in factory defualt state.

AOS-CX is the latest verion

PS.I did Factory reset by press and hold reset button more than 5 seconds and in CLI, enter command "erase startup and boot system"

------------------------------
Ratchapas Shatsa-Nga
------------------------------