There is
no separate "
management interfaces of the primary and secondary members", in a stack
(make note of the plural: s)
It states a (L2) VLAN, not a (L3) ip adress.
If utilizing a L3 ip-adress in either the default or mgmt VRF, (for management)
and a dual link to any core north-bound .
There will be an Ip address conflict from the core, and consequently, NO management interface
In a split-stack where a broken stack (into two); contain two Conductors, or Standbys
Original Message:
Sent: Aug 21, 2022 07:12 AM
From: Davide Poletto
Subject: VSF split-detect
It means exactly connecting them (a) to the same Broadcast Domain (a dedicated VLAN you're going to use *for* Management and also for the Split-Detection between VSF members, as example) or connecting them (b) directly each other (really point-to-point), in this latter (b) case you're going to lose the possibility to access both Management interfaces since those ones are connectly directly and not by means of an auxiliary switch (as it should happen in the former (a) case).