Comware

 View Only
Back to discussions
Expand all | Collapse all

VxLAN Anycast gateway issue - not egressing locally DC

This thread has been viewed 7 times

  • 1.  VxLAN Anycast gateway issue - not egressing locally DC

    Posted 30 days ago

    Any advise or things to check in regards to VXLAN/Anycast gateways homed in one DC/Switch fabric seem to be using the other DC as their gateway at not the local Anycast, please see below ;

    In example VLAN 999 exists and is strecthed between both DCs , this symptom happens to any hosts connected to the DC on the right,  any VXLAN attached host on the CX10Ks route to the VTEP (local 8k) but then jump over the Point to Point link to the other DC /gateway where there is also the same vxlan located, all hosts on the left DC correctly egress the local firewall.

    any gotchas or things to check?

    Thanks

    Mark



    -------------------------------------------


  • 2.  RE: VxLAN Anycast gateway issue - not egressing locally DC

    Posted 26 days ago

    Time to move to a newer model I think...

    Anyway, these power supplies are plenty & cheap on ebay



    ------------------------------
    spgsitsupport
    ------------------------------

    Original Message


Related Content