Wireless Access

 View Only
Back to discussions
Expand all | Collapse all

Wireless sync with Sony P800 to Evo N600c

This thread has been viewed 0 times

  • 1.  Wireless sync with Sony P800 to Evo N600c

    Posted Mar 14, 2003 04:57 AM
    I am running Widcomm Bluetooth 1.2.2.4 and PC Suite P800 1.1.0. on Win 2000.
    Bluetooth Serial Port connects and disconnects after a view seconds, and reconnects after 1 Minute and disconnects again....
    Manual Serial Port Connection causes error message "remote Ger??t hat Verbindung getrennt" = "remote device disconnected connection"
    Same Problem with dial up-modem-connection. System disconnects after a view seconds


  • 2.  RE: Wireless sync with Sony P800 to Evo N600c

    Posted Mar 14, 2003 12:40 PM
    If we are talking about an adapter that goes on a serial port and converts to bluetooth I'd look at the Device Manager (Control Panel/System/Hardware) and open the Ports/Com Port then look under settings. See what your flow control settings are set to. Also look in whatever software you use to configure the thing to see if you are using the hardware signals or ignoring them. You might also check the BIOS setup to see if there are any options for the com port.

    Ron


Related Content