The WA2620 does download it's image from the controller.
Image download in progress for AP
Failed to connect to AC for AP testap1
WA2620 is brand new. Probibly not configured correctly.
Do I need special FIT software for this AP to operate in managed mode
using the WX3024 controller? Auto_AP does not appear to work.
Could somebody please post a basic configuration for a WA2620 ?
Here is my WX3024 config and my WA2620 config.
I'm sure I'm missing something simple.
begin WX3024 Config
====================
dis curr
#
version 5.20, Release 3111P01, Release 3111P01
#
sysname WX3024
#
domain default enable system
#
ip host ns.somedomain.org 10.x.x.x
ip host ns3.otherdomain.org 10.x.x.x
#
telnet server enable
#
portal trap server-down
#
oap management-ip 192.168.0.101 slot 0
#
wlan country-code US
#
wlan auto-ap enable
#
vlan 1
#
domain system
access-limit disable
state active
idle-cut disable
self-service-url disable
#
user-group system
#
local-user admin
password cipher G%3Q/UW6aBaQ=^Q`MAF4<1!!
authorization-attribute level 3
service-type ssh telnet
#
wlan rrm
dot11a mandatory-rate 6 12 24
dot11a supported-rate 9 18 36 48 54
dot11b mandatory-rate 1 2
dot11b supported-rate 5.5 11
dot11g mandatory-rate 1 2 5.5 11
dot11g supported-rate 6 9 12 18 24 36 48 54
#
wlan radio-policy 257
#
wlan radio-policy 258
#
wlan service-template 1 clear
ssid Wireless
bind WLAN-ESS 0
service-template enable
#
interface NULL0
#
interface Vlan-interface1
ip address 10.x.1.18 255.255.128.0
#
interface GigabitEthernet1/0/1
#
interface WLAN-ESS0
port link-type hybrid
port hybrid vlan 1 untagged
#
wlan ap testap1 model WA2620-AGN
description changeme
serial-id 219801A0AA909CG01373
radio 1 type dot11a
radio-policy 257
service-template 1
radio 2
radio-policy 258
service-template 1
#
ip route-static 0.0.0.0 0.0.0.0 Vlan-interface1 10.33.1.1
#
snmp-agent
snmp-agent local-engineid 8000002B03002473960050
snmp-agent community read public
snmp-agent sys-info contact netadmin@somedomain.org
snmp-agent sys-info location The Ozone
snmp-agent sys-info version v2c v3
#
ssh server enable
sftp server enable
#
load xml-configuration
#
user-interface aux 0
user-interface vty 0 4
authentication-mode scheme
user privilege level 3
#
return
=====================
Begin WA2620AGN Config
===============================
dis curr
#
version 5.20, Beta 1102P01
#
sysname WA2620-AGN
#
info-center source LWPC channel 4
#
telnet server enable
#
wlan ac ip 10.x.1.18
#
vlan 1
#
interface NULL0
#
interface Vlan-interface1
ip address 10.x.1.20 255.255.128.0
#
interface GigabitEthernet1/0/1
#
interface WLAN-Radio1/0/1
description change radio1 description
#
interface WLAN-Radio1/0/2
#
ip route-static 0.0.0.0 0.0.0.0 10.33.1.1
#
#
user-interface con 0
user-interface vty 0 4
user privilege level 3
set authentication password simple h3capadmin
#
return