Wired Intelligent Edge

Hello everyone,

we currently have a working ZTP solution for 2530 switches without Airwave or Central, only with a DHCP/TFTP server. There we have only one basic configuration for all of them. To make this possible, we use the Ignore tag for the Generic header ID, as described here: https://techhub.hpe.com/eginfolib/networking/docs/switches/YA-YB/16-01/webhelp/content/ch07s04.html

Unfortunately this does not work with the 2930 series. Is there any similar function for these devices or does every switch type (JL319A, JL321A) have to be configured individually ?

Greetings,
Lukas

Hi Lukas,

I was looking for this as well, some time ago and the answer was, that the ignore tag is not available for the 2930 platform. They have to configured individually, unfortunately.

------------------------------
Florian Baaske
------------------------------

Original Message:
Sent: Nov 18, 2020 07:01 AM
From: Unknown User
Subject: ZTP with TFTP/DHCP at ArubaOS-CX

Hello everyone,

we currently have a working ZTP solution for 2530 switches without Airwave or Central, only with a DHCP/TFTP server. There we have only one basic configuration for all of them. To make this possible, we use the Ignore tag for the Generic header ID, as described here: https://techhub.hpe.com/eginfolib/networking/docs/switches/YA-YB/16-01/webhelp/content/ch07s04.html

Unfortunately this does not work with the 2930 series. Is there any similar function for these devices or does every switch type (JL319A, JL321A) have to be configured individually ?

Greetings,
Lukas

Thanks for the update and quick reply. I'll be sure to keep an eye on this thread. Looking for the same issue. Bumped into your thread. Thanks for creating it. Looking forward for  TellPopeyes Survey

------------------------------
Robinson Robinson
------------------------------

Original Message:
Sent: Nov 18, 2020 07:01 AM
From: Unknown User
Subject: ZTP with TFTP/DHCP at ArubaOS-CX

Hello everyone,

we currently have a working ZTP solution for 2530 switches without Airwave or Central, only with a DHCP/TFTP server. There we have only one basic configuration for all of them. To make this possible, we use the Ignore tag for the Generic header ID, as described here: https://techhub.hpe.com/eginfolib/networking/docs/switches/YA-YB/16-01/webhelp/content/ch07s04.html

Unfortunately this does not work with the 2930 series. Is there any similar function for these devices or does every switch type (JL319A, JL321A) have to be configured individually ?

Greetings,
Lukas