At this point in time, there is a chance that some features are unavailable in New Central configuration. Based on questions that you have asked over time, using quite specific features, it may be better to wait till general availability. The way you configure your network is different between classic and new Central, so you may need to change your configuration design/habits.
Unless you have a local SE that you can work with, and get the missing features reported so they can be added, or you have specific use cases where the new configuration model would help, I would leave new Central configuration where it is for now.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your HPE Aruba Networking partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact HPE Aruba Networking TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or HPE Aruba Networking.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Sep 11, 2025 02:20 AM
From: JL24
Subject: New Central and missing features...
I have asked to enable new central with edit features in our testing workspace so that we can evaluate features there...
Do I understand right that there might be restrictions still in different features to use or is this going to be non-existing feature in new Central (Which might render Central to be pretty much useless to our use then)?
------------------------------
Jori Luoto
AV-IT Specialist
Audico Systems oy
Original Message:
Sent: Sep 10, 2025 06:26 PM
From: ariyap
Subject: New Central and missing features...
it is best to work with your local Aruba SE as this is still allow-listed feature.
------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
Original Message:
Sent: Sep 09, 2025 09:16 AM
From: JL24
Subject: New Central and missing features...
Hello,
Just got New Central enabled in our POC instance and done some testing with it. Now I need to ask few things:
If I need to add let's say one single vlan into 50 switches which all should have few extra configurations in L2 level.. Like
vlan 222
name ThisIsDoable
ip igmp snooping version 2
ip igmp snooping static-group 224.0.1.131
ip igmp snooping enable
With old central I will create vlan to proper group and after deployment I will open MultiEdit, select max 50 devices, edit config, copy-paste three lines into proper place and Save...
How do I do this in new central?
------------------------------
Jori Luoto
AV-IT Specialist
Audico Systems oy
------------------------------