Comware

how to configure data and voice vlan in same port of 1950 HP switch

Hi,

Try to setup port to trunk or hybrid and tagged the voice vlan and the data vlan should be untagged.
Also enable lldp or cdp as per the requirement.

Thanks!

Hello @raj567 ,

Has my post helped you to answer your query?

Thanks!

Hi

when I enter in to CLI Mode,I am getting <hp>.

unable to enter configuration mode.can you please tell how to enter config t or configuration mode.

RAJESH

Hi

when I enter in to CLI Mode,I am getting <hp>.

unable to enter configuration mode.can you please tell how to enter config t or con

2. Now go to Network->Interfaces and select interface which you want to configure for both. 

Follow the same as per the screenshots.

3.  Network->Links->LLDP and follow the settings for the selected interface as below:

I hope this will help you.

Thanks!

hi

thanks a lot.

hope vlan 2 is voice Lan and it should be tagged anf vlan 3 is data vlan and it should be untagged..

what is Qos setup to be done.

And also I am doing etherchannel from This L2 Switch( two Links from port 23 and 24) to 2 L3 Switch 2930f ( stacked L3 Switch ). access ports.

just if i make etehr-chgroup and give identication no is enough.

Rajesh

hi

i did the way you guided me.still my IP phones not getting mac address.

I should add UID to switch.pls confirm

Thanks in advance

Rajesh

Hi,

You can add UID.

Also share the screenshots.

Thanks!