Two procurve 5308 connected together on port c1. Switch A and Switch B are connected together on port c1. Switch A and Switch B are procurve 5308s. Also,these 5308 also have layer 2 switch connected to them on port c1.When i do a show ip route i see that vlan 1 is the vlan that the switches are learning there routes from. Do i need RIP enabled on every VLAN or can i just leave RIP enabled on VLAN 100 and have that VLAN be the vlan where the switch learns its routes from
SWITCH A
vlan 1
name "DEFAULT_VLAN"
untagged B16,E1-E4,F1-F4,G1-G4,H1-H4
ip address 172.16.16.1 255.255.255.0
no untagged A1-A16,B1-B15,C1
ip igmp
exit
vlan 10
name "SERVERS"
untagged A1-A16,B1-B5,B7,B10-B14
ip address 172.31.30.254 255.255.255.0
tagged B6,G1,H3,C1
ip igmp
exit
vlan 12
name "comps"
ip address 172.31.31.254 255.255.255.0
ip helper-address 172.31.30.1
tagged B6,G1-G2,C1
ip igmp
exit
vlan 100
name "Building Connect"
untagged B8-B9,B15
ip address 192.168.1.1 255.255.255.0
tagged B6,F1,C1
ip igmp
spanning-tree
spanning-tree priority 0
router rip
exit
vlan 1
ip rip
exit
vlan 10
ip rip
exit
vlan 12
ip rip
exit
vlan 100
ip rip
exit
SWITCH B
vlan 1
name "DEFAULT_VLAN"
untagged B16,E1-E4,F1-F4,G1-G4,H1-H4
ip address 172.16.16.254 255.255.255.0
no untagged A1-A16,B1-B15,C1
ip igmp
exit
vlan 9
name "SERVERS"
untagged A1-A16,B1-B5,B7,B10-B14
ip address 192.168.35.254 255.255.255.0
tagged B15,C1
ip igmp
exit
vlan 12
name "comps"
tagged B15 ,C1
untagged A1-A5
ip igmp
vlan 11
name "comps"
ip address 192.168.30.254 255.255.255.0
ip helper-address 192.168.35.1
tagged B6,F1,G1-G2
ip igmp
exit
vlan 100
name "Building Connect"
untagged B8-B9,B15
ip address 192.168.1.254 255.255.255.0
tagged B6,C1
ip igmp
exit
vlan 1
ip rip
exit
vlan 9
ip rip
exit
vlan 11
ip rip
exit
vlan 100
ip rip
exit
#VLAN