Network Management

 View Only
Back to discussions
Expand all | Collapse all

Access outer network through HP V1910

This thread has been viewed 4 times

  • 1.  Access outer network through HP V1910

    Posted Jan 24, 2022 09:44 AM
    Access outer network through HP v1910
    Network is shown above. Two main HP Switches are core of network. It is working fine with ADC. Recently an app has been added from a corporate, they deployed their network and given us Cisco switch and a ethernet cable. When I plug a laptop to that cisco switch and assign IP: 192.168.100.98, Gateway: 192.168.200.97, it starts work. The problem is that I plugged that cisco cable in HP switch and sitting on my desk assigning this IP did not work, it says unidentified network. Do I need configuration on HP Switch in order to access that, please help ??


    ------------------------------
    Khadim Awan
    ------------------------------


  • 2.  RE: Access outer network through HP V1910

    Posted Jan 25, 2022 04:37 AM
    You have now two networks that are in different IP ranges. That will not work without proper routing (and network design). Probably best is to work with 'corporate' and let them change either their network or help you to change your network to get it routable or renumber to the same IP space. You cannot just connect two networks together and expect it to work.

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------



Related Content