Comware

 View Only
Back to discussions
Expand all | Collapse all

Application program does not exist Switch HP V1910-48G

This thread has been viewed 1 times

  • 1.  Application program does not exist Switch HP V1910-48G

    Posted Feb 27, 2015 03:46 PM

    Good afternoon,

     

    I'm having problems with hp switch v1910-48g. Not possessed the admin password of the switch and follow an internet guide to reset it excluding the .cfg file from flash. Inadvertently ended up excluding firmeware.

    I tried to reinstall the bootrom using the procedures listed in the tutorial update more without success.

    I am doing the following:

    Connect the switch by COM, speed 38400


    Option 6. enter bootrom upgrade menu


    Option 1. Update full BootRom


    Option 3. Set XMODEM protocol parameters


    Option 3. 38400

     

    After these procedures, through the transfer >> Send, sending the .bin file to flash.

     

    At the end I get the following message: something wrong with the file and options to advance the update in flash not continue.

     

    Please help me.

     

     

    P.S. This thread has been moved from ProCurve / ProVision-Based to Web and Unmanaged. - Hp Forum Moderator



Related Content