Controllerless Networks

 View Only

  • 1.  Clients list shows disconnected clients

    Posted May 26, 2024 03:23 PM

    Hi there,

    When I run show clients on my Instant deployment it will show not only the connected devices but also the ones that already disconnected.

    The UI interface also shows all the clients, even the ones that are disconnected.

    But if I run show ap debug client-table only connected devices show.

    I would expect the "Clients" tab of the UI to only show users that are effectively connected, so is what I'm seeing normal?

    Thanks



  • 2.  RE: Clients list shows disconnected clients

    Posted May 26, 2024 07:29 PM

    It depends on the way clients disconnect, some of them will then rely on idle timeout to be flushed out of the user-table.



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------



  • 3.  RE: Clients list shows disconnected clients

    Posted May 27, 2024 04:28 AM

    Uhmm,

    Then maybe there is some bug with 8.10.0.12.

    Because even when clients cleanly disconnect I see them still in the client list but not on the user-table.

    Also, even though clients show in the clients table, I cant run "show client status mac" for those that are disconnected.


    Original Message


  • 4.  RE: Clients list shows disconnected clients

    Posted May 27, 2024 08:26 PM

    do these clients connect to PSK or dot1x WLANs? if dot1x, are you using RADIUS Accounting for it?



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------

    Original Message


  • 5.  RE: Clients list shows disconnected clients

    Posted May 28, 2024 02:32 PM

    Happens on both PSK and Dot1x SSIDs.


    Original Message


Related Content