Security

Hi

I want to through profiling to identify client device hostname and write to endpoint attribute, but client all uses a static IP address.

I think DHCP relay to cppm is not helpful.

Is any other method can profiling?

Thanks.

you can use subnet scanning with SNMP and also use  a discovery via an ARP-Table read, again using SNMP

See this section of the guide

------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
------------------------------

Hi

add device is mean controller or client?

Thanks.

Original Message:
Sent: Jun 19, 2024 07:58 PM
From: ariyap
Subject: CPPM static ip profiling

you can use subnet scanning with SNMP and also use  a discovery via an ARP-Table read, again using SNMP

See this section of the guide

------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
------------------------------

Device in this context means Controller, Switch, etc. 
The information will be read by ClearPass via SNMP from Controller or Switch and write it to endpoint Database. This is often used for Client Devices which has static IPs.

see https://arubanetworks.com/clearpassdocs -> Profiling

Original Message:
Sent: Jun 20, 2024 03:57 AM
From: CHAO HSUAN HSIAO
Subject: CPPM static ip profiling

Hi

add device is mean controller or client?

Thanks.

Original Message:
Sent: Jun 19, 2024 07:58 PM
From: ariyap
Subject: CPPM static ip profiling

you can use subnet scanning with SNMP and also use  a discovery via an ARP-Table read, again using SNMP

See this section of the guide

------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.