Comware

 View Only

  • 1.  DAC Cable to HP 2920

    Posted Jan 24, 2017 02:57 PM

    Hello,

    Is there a DAC cable to go from HP 2920(with SFP+ expansion module) to HP A5800(JC103a)

    I know it never used to be supported but was something HP was working on

    Thanks

    Robbie



  • 2.  RE: DAC Cable to HP 2920

    Posted Jan 24, 2017 06:01 PM

    Probably (read this) you should go with one of these (see QuickSpecs) to fulfill requirements [*] on the Aruba side:

    • HPE X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable J9281B
    • HPE X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable J9283B
    • HPE X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable J9285B

    and then, on Comware side, you would just use this command (transceiver phony-alarm-disable) if the Switch doesn't recognize properly the HPE X242 SFP+ DAC on its side.

    [*] I've to say that actually, with recent ArubaOS-Switch releases (16.02 branch onward), there is a command to overcome the 3rd party transceivers - as they can be categorized, so unsupported - "not recognized as genuine" issue...so the discussion I linked could be not true anymore now.

    The contrary could be true too: using supported SFP+ DAC Cables on Comware side and then, on ArubaOS-Switch side, use the provided command to admit the usage of non HP genuine Transceivers as the HPE X242 FlexNetwork DAC Cables will be seen by the Aruba switch:

    • HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable JD095C
    • HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable JD096C
    • HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable JD097C
    • HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable JG081C


Related Content