Comware

Hi,

I have a question with an HP 5900 switch. The exact model is HP 5900AF-48XG-4QSFP+ Switch (JC772A).

When I type "display qos-acl resource" command to display the resource usage, there is this "reserved" column which shows that the switch is reserving 1024 out of 2048 of IFP ACL resource total.

Is there a way to release this reserved resource, or anyway to change its value?  

[sw-of-inst-1]display qos-acl resource

Interfaces: XGE1/0/1 to XGE1/0/48, FGE1/0/49 to FGE1/0/52

---------------------------------------------------------------------

Type             Total      Reserved   Configured Remaining  Usage

---------------------------------------------------------------------

VFP ACL        1024       256                      0          768        25%

IFP ACL          2048     1024                     0          1024      50%

IFP Meter      1024        512                     0          512        50%

IFP Counter  1024        512                     0          512        50%

EFP ACL        1024            0                      0          1024       0%

EFP Meter       512            0                      0          512         0%

EFP Counter   512            0                      0          512         0%

Thanks,

Joon

This is something that pisses me off aswell...

Last update for A5820 (or if it was A5120) said that the firmware update upped number of ACLs from 1000 to 2000... at first I went "wohooo!" and then I found out the same as you...

This is the output of "display acl resource" on a A5820 (I have a few ACLs but its like less than 10 rows in total):

 Interface:
   XGE1/0/1 to XGE1/0/24, GE1/0/25 to GE1/0/28
---------------------------------------------------------------------
 Type          Total       Reserved    Configured  Remaining   Usage
---------------------------------------------------------------------
 VFP ACL       1024        256         0           768         25%
 IFP ACL       2048        1280        8           760         62%
 IFP Meter     1024        640         0           384         62%
 IFP Counter   1024        640         0           384         62%
 EFP ACL       512         0           0           512         0%
 EFP Meter     256         0           0           256         0%
 EFP Counter   256         0           0           256         0%

and here is the same thing from a A5120:

 Interface:
   GE1/0/1 to GE1/0/24
---------------------------------------------------------------------
 Type          Total       Reserved    Configured  Remaining   Usage
---------------------------------------------------------------------
 IFP ACL       2048        768         0           1280        37%
 IFP Meter     1024        384         0           640         37%
 IFP Counter   1024        384         0           640         37%

 Interface:
   GE1/0/25 to GE1/0/52, XGE1/1/1 to XGE1/1/2
---------------------------------------------------------------------
 Type          Total       Reserved    Configured  Remaining   Usage
---------------------------------------------------------------------
 IFP ACL       2048        768         2           1278        37%
 IFP Meter     1024        384         0           640         37%
 IFP Counter   1024        384         0           640         37%

Worth mentioning is that both A5820 and A5120 in my case have ipv6 enabled and the A5820 also have approx 100 vlan-interfaces configured with IPv6-addresses along with "ip urpf loose" in case any of this affects number of reserved ACLs (I have unfortunately no way to test this since I dont have any spare devices to test this on).

Interesting, I haven´t noticed this, yet. Let´s add some numbers:

• A5800 with release 1808P17

 Interface:
   GE1/0/1 to GE1/0/24, XGE1/0/25 to XGE1/0/28
---------------------------------------------------------------------
 Type          Total       Reserved    Configured  Remaining   Usage
---------------------------------------------------------------------
 VFP ACL       2048        512         0           1536        25%
 IFP ACL       8192        5120        0           3072        62%
 IFP Meter     4096        2560        0           1536        62%
 IFP Counter   4096        2560        0           1536        62%
 EFP ACL       1024        0           0           1024        0%
 EFP Meter     512         0           0           512         0%
 EFP Counter   512         0           0           512         0%

• A5500-EI with release R2221:

 Interface:
   GE1/0/1 to GE1/0/28
---------------------------------------------------------------------
 Type          Total       Reserved    Configured  Remaining   Usage
---------------------------------------------------------------------
 VFP ACL       1024        0           0           1024        0%
 IFP ACL       4096        1536        48          2512        38%
 IFP Meter     2048        768         0           1280        37%
 IFP Counter   2048        768         0           1280        37%
 EFP ACL       512         0           0           512         0%
 EFP Meter     256         0           0           256         0%
 EFP Counter   512         0           0           512         0%

• A5500-HI with release 5501:

 Interface:
   GE1/0/1 to GE1/0/24, GE1/0/49 to GE1/0/50, XGE1/0/53
---------------------------------------------------------------------
 Type          Total       Reserved    Configured  Remaining   Usage
---------------------------------------------------------------------
 VFP ACL       2048        512         0           1536        25%
 IFP ACL       4096        1280        6           2810        31%
 IFP Meter     2048        640         0           1408        31%
 IFP Counter   2048        640         0           1408        31%
 EFP ACL       512         0           6           506         1%
 EFP Meter     256         0           0           256         0%
 EFP Counter   512         0           0           512         0%