Comware

HP GbE2c Ethernet Blade Switch Vs Comware 7510 with Bridge Aggregation.

Hello everybody.

I have a problem to form Bagg link aggregation / Bridge Aggregation between Switch Comware 7510 and HP Gb2c Ethernet Blade.

I was configure with Bagg  link aggregation / Bridge Aggregation in the side of Comware with mode static and dynamic, the interfaces was UP but Bagg isn´t form.

In the side of HP GbE2c  was configured Lacp in active / passive mode.

I haven´t to any log, because it does not show anything. 

Thank You.

Roberto Paiva.

P.S. This thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to Comware-Based. -HP Forum Moderator

Do a "show lacp aggregator <port number>" .

interface Bridge-Aggregation14
 description EDUCACAO_01
 port link-type trunk
 undo port trunk permit vlan 1
 port trunk permit vlan 103 166
 link-aggregation mode dynamic
 stp root-protection
 dhcp-snooping trust

#########################################

[CORE_A]disp curr int g1/8/0/13
#
interface GigabitEthernet1/8/0/13
 port link-mode bridge
 port link-type trunk
 port trunk permit vlan 1 103 166
 stp root-protection
 port link-aggregation group 14
#
return
[CORE_A]disp curr int g3/8/0/13
#
interface GigabitEthernet3/8/0/13
 port link-mode bridge
 port link-type trunk
 port trunk permit vlan 1 103 166
 stp root-protection
 port link-aggregation group 14

#####################################################

[CORE_A]disp link-aggregation verbose Bridge-Aggregation 14
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected
Flags:  A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
        D -- Synchronization, E -- Collecting, F -- Distributing,
        G -- Defaulted, H -- Expired

Aggregation Interface: Bridge-Aggregation14
Aggregation Mode: Dynamic
Loadsharing Type: Shar
System ID: 0x8000, cc3e-5f69-64eb
Local:
  Port             Status  Priority Oper-Key  Flag
--------------------------------------------------------------------------------
  GE1/8/0/13       U       32768    13        {A}
  GE3/8/0/13       U       32768    13        {A}
Remote:
  Actor            Partner Priority Oper-Key  SystemID               Flag
--------------------------------------------------------------------------------
  GE1/8/0/13       20      32768    20        0x8000, 6cae-8b94-de00 {ACG}
  GE3/8/0/13       21      32768    20        0x8000, 6cae-8b94-de00 {ACG}

##############################################################################

In the Switch GbE2c Ethernet Blade .

GbE2c L2/L3 Ethernet Blade Switch for HP c-Class BladeSystem
sysName:
sysLocation:
RackId: Default RUID
RackName: xxxxxxxxxxxxx
EnclosureSerialNumber: xxxxxxxxxxxx
EnclosureName: xxxxxxxxxxxxxxx
BayNumber:  1

Switch has been up for 166 days, 19 hours, 59 minutes and 49 seconds.
Last boot reason: power cycle

MAC address: 6c:ae:8b:94:de:00    IP (If 256) address: x.x.x.x
Revision: 0A
Switch Serial No:
Hardware Part No: 438030-B21        Spare Part No: 438475-001
Software Version 5.2.8 (FLASH image2), active configuration.


port   mode     adminkey  operkey  selected   prio  aggr  trunk  status
-----------------------------------------------------------------------
20     active         20       20     no     32768    --     --   down
21     active         20       20     no     32768    --     --   down

>> LACP# port 20
port 20
----------------------------------------------
Port enabled                  - TRUE
LACP enabled                  - TRUE
LACP admin enabled            - TRUE
Port LACP status              - down

Actor System ID               - 6c:ae:8b:94:de:00
Actor System Priority         - 32768
Actor Admin Key               - 20
Actor Oper Key                - 20
Actor Port Number             - 20
Actor Port Priority           - 32768

Partner Oper System Priority  - 0
Partner Oper System ID        - 00:00:00:00:00:00
Partner Oper Key              - 0
Partner Oper Port Number      - 0
Partner Oper Port Priority    - 0

Actor Admin Port state
  Activity:        Active  Timeout:       Long    Aggregation:   TRUE
  Synchronization: FALSE   Collecting:    FALSE   Distributing:  FALSE
  Defaulted:       FALSE   Expired:       FALSE

Actor Oper Port state
  Activity:        Active  Timeout:       Long    Aggregation:   TRUE
  Synchronization: FALSE   Collecting:    FALSE   Distributing:  FALSE
  Defaulted:       TRUE    Expired:       FALSE

Partner Oper Port state       - 0x0
Individual                    - FALSE
Selected Aggregator ID        - 0
Attached Aggregator ID        - 0
ready_n                       - TRUE
ntt                           - FALSE
selected                      - Unselected
port_moved                    - FALSE

Collision and Detection state turned OFF!

Rx machine state              - LACP_RX_DEFAULTED_STATE
Mux machine state             - LACP_MUX_DETACHED_STATE
Periodic machine state        - LACP_PERIODIC_SLOW_STATE

Periodic transmit timer       - 3 sec
Current while timer           - 0 sec


>> LACP# port 21
port 21
----------------------------------------------
Port enabled                  - TRUE
LACP enabled                  - TRUE
LACP admin enabled            - TRUE
Port LACP status              - down

Actor System ID               - 6c:ae:8b:94:de:00
Actor System Priority         - 32768
Actor Admin Key               - 20
Actor Oper Key                - 20
Actor Port Number             - 21
Actor Port Priority           - 32768

Partner Oper System Priority  - 0
Partner Oper System ID        - 00:00:00:00:00:00
Partner Oper Key              - 0
Partner Oper Port Number      - 0
Partner Oper Port Priority    - 0

Actor Admin Port state
  Activity:        Active  Timeout:       Long    Aggregation:   TRUE
  Synchronization: FALSE   Collecting:    FALSE   Distributing:  FALSE
  Defaulted:       FALSE   Expired:       FALSE

Actor Oper Port state
  Activity:        Active  Timeout:       Long    Aggregation:   TRUE
  Synchronization: FALSE   Collecting:    FALSE   Distributing:  FALSE
  Defaulted:       TRUE    Expired:       FALSE

Partner Oper Port state       - 0x0
Individual                    - FALSE
Selected Aggregator ID        - 0
Attached Aggregator ID        - 0
ready_n                       - TRUE
ntt                           - FALSE
selected                      - Unselected
port_moved                    - FALSE

Collision and Detection state turned OFF!

Rx machine state              - LACP_RX_DEFAULTED_STATE
Mux machine state             - LACP_MUX_DETACHED_STATE
Periodic machine state        - LACP_PERIODIC_SLOW_STATE

Periodic transmit timer       - 8 sec
Current while timer           - 0 sec


>> LACP#

>> LACP# /cfg/l2/lacp
------------------------------------------------------------
[LACP Menu]
     port     - LACP Port Menu
     sysprio  - Set LACP system priority
     timeout  - Set LACP system timeout scale for timing out partner info
     delete   - Delete an LACP trunk
     default  - Restore default LACP system configuration
     cur      - Display current LACP configuration

>> LACP# cur
Current LACP system ID: 6c:ae:8b:94:de:00
Current LACP system Priority: 32768
Current LACP timeout scale: long

Current LACP params for 20:  active, Priority 32768, Admin Key 20

Current LACP params for 21:  active, Priority 32768, Admin Key 20

Current LACP params for 22:  active, Priority 32768, Admin Key 20

Attachment(s)

HP7510-BAGG-Fail-Gbc2e.txt   703 B 1 version

Gbc2e-BAGG-Fail-HP7510.txt   703 B 1 version

Why not try removing VLAN1 from

interface GigabitEthernet1/8/0/13 & 14

so it matches the BAGG14 interface VLAN allowed list?

Good Morning.

This problem is solved!

Was a moved incorrect in the cables that staff of cliente did.

Thank you.

Has its possible to find the comware switch Bridge ID by the switch serial number..???