Perfect, just as expected :) several backup/restore issues were solved in H08/H09
-------------------------------------------
Original Message:
Sent: Nov 13, 2025 03:47 AM
From: spgsitsupport
Subject: IMC cannot backup running config from ONE ONLY switch
Upgraded to iMC_PLAT_7.3_E0710H09 and like magic, the bug disappeared & the backup works as it should, again ....
------------------------------
spgsitsupport
Original Message:
Sent: Jul 16, 2025 04:53 AM
From: vasilyotov
Subject: IMC cannot backup running config from ONE ONLY switch
Hello,
you can upgrade to E0710H08 which is the latest IMC version.
If the issue still exists you can open a case with the support for further troubleshooting.
Please note a SW support contract is needed for opening a case
Regards,
Vasil
Original Message:
Sent: Jul 16, 2025 04:17 AM
From: blazej.sikorski
Subject: IMC cannot backup running config from ONE ONLY switch
Hi,
E0710P06.
Regards
Original Message:
Sent: Jul 16, 2025 03:47 AM
From: vasilyotov
Subject: IMC cannot backup running config from ONE ONLY switch
Hello,
what is your IMC version?
Regards,
Vasil
Original Message:
Sent: Jul 14, 2025 09:40 AM
From: blazej.sikorski
Subject: IMC cannot backup running config from ONE ONLY switch
Hi,
I have same issue with CX 6000 switch.
For several of the over 50 switches, the running-config suddenly stopped copying. The startup-config is copying correctly. For the remaining switches, both running and startup work fine. Did you find a solution?
Original Message:
Sent: Feb 27, 2025 03:46 AM
From: spgsitsupport
Subject: IMC cannot backup running config from ONE ONLY switch
But I have other CX switches on same firmware that work perfectly fine
Honestly I am not that bothered, as to spend the time on it with opening the case, it has startup config backup, that is good enough to me
------------------------------
spgsitsupport
Original Message:
Sent: Feb 27, 2025 02:06 AM
From: IvoVelikov
Subject: IMC cannot backup running config from ONE ONLY switch
Hello,
I think there is an ongoing issue with that, where only running configuration of Aruba CX switches is affected and the development team is working on it. I would recommend opening a case with the TAC to get the fix (if you have an active support contract).
Thank you,
Best Regards,
Ivaylo
Original Message:
Sent: Feb 26, 2025 03:44 AM
From: spgsitsupport
Subject: IMC cannot backup running config from ONE ONLY switch
Daily backup of various switches. Since last week it started failing on the same ONE 6300 switch.
But ONLY the running config. startup config from the SAME switch gets backed up just fine! (which makes no sense)
Using username "ArubaManager".ArubaManager@10.10.14.34's password:Last login: 2025-02-26 02:34:05 from 10.10.9.40User "ArubaManager" has logged in 11 times in the past 30 dayssw-dome-6300M#sw-dome-6300M#sw-dome-6300M# copy running-config tftp://10.10.9.40/running_1738086610.cfg jsonsw-dome-6300M# copy running-config tftp://10.10.9.40/running_1738086610.cfg json
I can login to the switch manually & run the same command & it does NOT fail:
ArubaManager@sw-dome-6300M's password:Last login: 2025-02-26 05:34:04 from 10.10.9.40User "ArubaManager" has logged in 13 times in the past 30 dayssw-dome-6300M# copy running-config tftp://10.10.9.40/running_1738086610.cfg jsonCopying configuration: [|] % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed100 38831 0 0 100 38831 0 2370k --:--:-- --:--:-- --:--:-- 2370k100 38831 0 0 100 38831 0 2370k --:--:-- --:--:-- --:--:-- 2370kCopying configuration: [Success]
Any other 6300 is not a problem (they are all on the same code release)
Anybody any ideas?
------------------------------
spgsitsupport
------------------------------