Comware

hi everyone i have little trouble here configuring IRF on HP 5500-24G-SFP EL Switches

recently i bought

Qty = 2  HP 5500 switches

Qty = 2  HP 10Gbe SFP+ Module

Qty = 2 HP 5500  10Gbe Local Connect Module

Qty = 2 HP x230 Local Connect 100Cm CX4 Cable

here is the challenge i'm Facing !!

i want this Switch as Core Swich for WiFI Network, i have Aruba 7205 controller Qty 2

can you please help me to understand how can i connect this 2 Switches and confiure IRF ( with Command Line  on each Switch )

which cable i need to connect where ?

i have read some document on HP site but it does not make me any sense

thanks.

If you follow the HP (or H3C) IRF guide, it takes you through it step by step.

http://www.manualslib.com/manual/759195/Hp-5500-Ei-Series.html?page=36#manual

https://www.youtube.com/watch?v=gdY-9B9pCJw

i have follow the same procedure unfortunately unable to make it work. 

could you please help me ?

i have 5920 switch Qty = 2 

[IPTV-Core-2] display irf
MemberID Role Priority CPU-Mac Description
*+2 Master 1 e8f7-2407-2997 ---
--------------------------------------------------
* indicates the device is the master.
+ indicates the device through which the user logs in.

The Bridge MAC of the IRF is: e8f7-2407-2996
Auto upgrade : yes
Mac persistent : 6 min
Domain ID : 0

plz help me to understand 

if it possible i would like to offer Teamviewer 

thanks. 

===========================================================================

MemberID Role Priority CPU-Mac Description
*+1 Master 1 e8f7-2407-337e ---
--------------------------------------------------
* indicates the device is the master.
+ indicates the device through which the user logs in.

The Bridge MAC of the IRF is: e8f7-2407-337d
Auto upgrade : yes
Mac persistent : 6 min
Domain ID : 0
<IPTV-Core-1>