Hi
Having trouble using a modem connecting to a remote system on the HP-UX B.11.11.
We can dial out and we do hear the modem talking to the remote system but I get no login prompt or any thing else back from it.
Our configuration seems to be correct, I hope.
sam was used
0/1/3/0 pci_mux0 PCI MUX (8 ports)
baud 9600
line is /dev/ttyd2a2
[X] Use Device for Calling out
[X] Receive In-coming Calls (start getty process)
[ ] CCITT Modem (European standard modems)
[ ] Use Hardware Flow Control Device Files (RTS/CTS protocol)
the Devices file...
Direct ttyd2a2 - 9600 direct
ACU ttyd2a2 - 9600 hayes
the Dialers file ...
ACU ttyd2a2 - 9600 hayes
hayes =,-, "" \dATZ\d\r OK\r \dAT\r\c OK\r \dATS7=45\r\c OK\r \EATDT\T\r\c CONNECT
/usr/sbin/lssf /dev/ttyd2a2
pci_mux0 card instance 2 port a2 callin at address 0/1/3/0 /dev/ttyd2a2
/usr/sbin/lssf /dev/cul2a2
pci_mux0 card instance 2 port a2 callout at address 0/1/3/0 /dev/cul2a2
/usr/sbin/lssf /dev/cua2a2
pci_mux0 card instance 2 port a2 callout at address 0/1/3/0 /dev/cua2a2
The /etc/inittab
a1:3:respawn:/usr/lbin/uucp/uugetty -r -t 60 -h ttyd2a2 9600
cu command
/usr/bin/cu -s9600 -lttyd2a2 dir
I have tried the cu command in different flavors to login to our remote system and the modem does seem to have lights flickering when I press "h" of a bunch of <ENTER> chars and I do get the "CONNECT 9600/ARQ/V34/LAPM/V42BIS" but that is the last I get.
Will you help
Steve
</ENTER>