Hello !
i have issue with radius protocol on switches.
When i replace a switch by another one, i copy past the same configuration, and radius is not working.
Everytime i tried to log with radius, switch ask to radius and ask after on local-system and reject me (i dont have local account) why the switch ask everytime on local after radius ?
%Sep 26 12:48:30:767 2017 sw-test-radius-240 SC/6/SC_AAA_LAUNCH: -AAAType=AUTHEN-AAAScheme= radius-scheme 802.1x-Service=login-UserName=paerrard@domain.net; AAA launched.
%Sep 26 12:48:39:761 2017 sw-test-radius-240 SC/6/SC_AAA_LAUNCH: -AAAType=AUTHEN-AAAScheme= local-Service=login-UserName=paerrard@domain.net; AAA launched.
%Sep 26 12:48:39:761 2017 sw-test-radius-240 LS/5/LS_AUTHEN_FAILURE: -AccessType=login-UserName=paerrard; Authentication is failed. User not found.
what are the good steps to activate and use radius on switch ?
here my conf :
domain default enable domain.net
radius scheme 802.1x
server-type extended
primary authentication 192.168.6.242
primary accounting 192.168.6.242
secondary authentication 10.75.4.46
secondary accounting 10.75.4.46
key authentication cipher XXXXX
key accounting cipher XXXXX
user-name-format without-domain
domain domain.net
authentication login radius-scheme 802.1x local
authorization login radius-scheme 802.1x local
accounting login radius-scheme 802.1x local
access-limit disable
state active
idle-cut disable
self-service-url disable
domain system
access-limit disable
state active
idle-cut disable
self-service-url disable
thx a lot for your help