Wireless Access

 View Only

  • 1.  RAP-2WG does not provision

    Posted Mar 05, 2014 05:58 PM

    I bought a used RAP off Ebay, did a factory reset on it and attempted to provision it but I'm getting the following error:

     

    Received error RC_ERROR_IKEP2-PKT1

     

    I then took a spare working RAP from my inventory, reset it and was able to provision it without issue so I know the problem is with the RAP from Ebay.

     

    The OS on my controller is 6.1.3.7 and the OS on the RAP is 3.3.2.11-rn-3.0.1

     

    Is this RAP compatible or do I have to upgrade the images?



  • 2.  RE: RAP-2WG does not provision

    Posted Mar 05, 2014 06:13 PM

     

    In order to get it  going you may have to downgrade your controller 5.x and upgrade the flash on the RAP2



  • 3.  RE: RAP-2WG does not provision

    Posted Mar 05, 2014 06:50 PM

    You can also contact TAC and they can point it to one of their controllers running older code and do the step upgrade.



  • 4.  RE: RAP-2WG does not provision

    Posted Mar 06, 2014 03:41 AM
    You'll need to upgrade the RAP to v5 then v6. You can't upgrade directly to v6 from v3


Related Content