Comware

 View Only

  • 1.  Redirection support on HP5130 switch

    Posted Oct 11, 2018 03:11 AM

    Hi Everyone,

    I am looking for information on supoprt for URL redirection for HP 5130 switches.
    The following model is being used in our environment:

    HPE Comware Software, Version 7.1.070, Release 3208P03
    Copyright (c) 2010-2017 Hewlett Packard Enterprise Development LP
    HPE 5130 48G PoE+ 4SFP+ EI Switch uptime is 7 weeks, 1 day, 15 hours, 18 minutes
    Last reboot reason : User reboot

    Boot image: flash:/5130ei-cmw710-boot-r3208p03.bin
    Boot image version: 7.1.070, Release 3208P03
    Compiled Dec 14 2017 18:00:00
    System image: flash:/5130ei-cmw710-system-r3208p03.bin
    System image version: 7.1.070, Release 3208P03
    Compiled Dec 14 2017 18:00:00

    Slot 1:
    Uptime is 7 weeks,1 day,15 hours,18 minutes
    5130-48G-PoE+-4SFP+ (370W) EI JG937A with 1 Processor
    BOARD TYPE: 5130-48G-PoE+-4SFP+ (370W) EI JG937A
    DRAM: 1024M bytes
    FLASH: 512M bytes
    PCB 1 Version: VER.B
    Bootrom Version: 147
    CPLD 1 Version: 002
    Release Version: HPE 5130 48G PoE+ 4SFP+ EI JG937A-3208P03
    Patch Version : None
    Reboot Cause : UserReboot
    [SubSlot 0] 48GE+4SFP Plus

    Any pointers, if this is supported?
    If supported, are there configuration documents that you could point to?

    Thank you,



  • 2.  RE: Redirection support on HP5130 switch

    Posted Oct 18, 2018 07:19 AM

    Hi,

     

    This is feature is supported.

    Kindly refer below link for the configuration guide:

     

    http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-a00007093en_us-1.pdf

     

     



  • 3.  RE: Redirection support on HP5130 switch

    Posted Oct 24, 2018 04:14 AM

    I was able to get the redirection working with Cisco ISE.
    The issue was the way ACL was configured earlier, had to tweak the ACL in the following way to get the redirection page forwarded to ISE.
    sample ACL that I used:

    rule 0 permit udp destination-port eq bootps
    rule 5 permit udp destination-port eq bootpc
    rule 10 permit udp destination-port eq dns
    rule 15 permit ip destination <Cisco ISE Server> 0



  • 4.  RE: Redirection support on HP5130 switch

    Posted Oct 29, 2018 03:57 AM

    There is one more update from Cisco, that dynamic redirectin is not supported with H3C devices. 

    The solution to allow redirection to work with Cisco ISE and other NAD that do not support redirection, Cisco's Auth VLAN feature could be utlized.

    The issue has been reported as a bug as of now here: Bug - CSCvn03432



Related Content