Comware

I have a MSR2003 HPE router and I need to expand the port on the router to connect to the firewall (for example, 10.10.10.1 - 10.10.10.2). Which SIC module do I need to choose?
Please tell me the part namber.

Hi ,

Kindly refer below quick specs and data sheet of MSR router 2003 for SIC module.

Quick Specs:

https://h20195.www2.hpe.com/v2/GetPDF.aspx/c04123140.pdf

Data Sheet:

https://h50146.www5.hpe.com/products/networking/datasheet/HP_MSR2000_Router_Series_J.pdf

Thanks!

Thank you, I need to connect the firewall as a link 10.10.10.1-10.10.10.2
JG738A is this module is OK? 

or JG739A? 

Hi,

Anything is fine. It depends on the requirement and comatibility.

Thanks!

Hi,

Anything is fine.. It depends on the requirement and comatibility.

HPE FlexNetwork MSR 1-port GbE Combo SIC Module JG738A
• min=0 \ max=1 SFP Transceiver See Configuration

Configuration Rules:
Note1: These Modules can install directly to the Routers (JG404A, JG405A, JG861A, JG406A, JG407A,
JG408A)
min=0\ max=2 per enclosure (only supported in Slots 2 and 4)
Note 2: These Modules can install directly to the Routers (JG409B)
min=0\ max=2 per enclosure
Note 3: The following Transceivers install into this Module:
HPE X120 1G SFP LC SX Transceiver JD118B
HPE X120 1G SFP LC LX Transceiver JD119B
HPE X125 1G SFP LC LH40 1310nm Transceiver JD061A
HPE X120 1G SFP LC LH40 1550nm Transceiver JD062A
HPE X125 1G SFP LC LH70 Transceiver JD063B
HPE X120 1G SFP LC LH100 Transceiver JD103A
HPE X120 1G SFP LC BX 10-U Transceiver JD098B
HPE X120 1G SFP LC BX 10-D Transceiver JD099B
HPE X120 1G SFP LC LH100 Transceiver JD103A
HPE X120 1G SFP RJ45 T Transceiver JD089B

HPE FlexNetwork MSR 4-port Gig-T Switch SIC Module

Configuration Rules:
Note1: These Modules can install directly to the Routers (JG404A, JG405A, JG861A, JG406A, JG407A,
JG408A)
min=0\ max=2 per enclosure (only supported in Slots 2 and 4)
Note 2: These Modules can install directly to the Routers (JG409B)
min=0\ max=2 per enclosuredule JG739A

Thanks!