Network Management

Hi all, 

i am new on aruba and i have a model that is not the same like 6300m, i configured snmpv3 enable

the i add ip authorized-manager 10.10.10.10 access manager

also snmpv3 user user1 auth sha pass priv aes256 pass

and snmpv3 group managerpriv user "user1" sec-model ver3.

for snmp3 do i need community?  the vrf context should be the default i dont use the oobm.

did i forget something?

Thanks alot.

This is what I have on a 2930F, it probably is the same/similar on 2920 (PVOS/AOS-S):

snmpv3 enable
snmpv3 only
snmpv3 restricted-access
snmpv3 group managerpriv user "airwave" sec-model ver3
snmpv3 user "airwave" auth sha "removed" priv aes "removed"

Note that aes-256 is a 'non standardized' encryption for SNMPv3, there are different incompatible (vendor) versions of aes-256; so that may be a reason that it doesn't work. In that case try aes, which is aes-128 and see if that works.

thanks the aes was the issue. 

snmpv3 enablesnmpv3 onlysnmpv3 restricted-accesssnmpv3 group managerpriv user "airwave" sec-model ver3snmpv3 user "airwave" auth sha "removed" priv aes "removed"

This is from my test 2920 managed via central.

snmpv3 enable
snmpv3 group managerpriv user "user-inform" sec-model ver3
snmpv3 notify "name_xxxxxxxx" tagvalue "tag_xxxxxxxx"
snmpv3 targetaddress "target_xxxxxxxx" params "param_xxxxxxxx" xx.xx.xx.xx taglist "tag_xxxxxxxx"
snmpv3 params "param_10100055" user "user-inform" sec-model ver3 message-processing ver3 priv
snmpv3 user "user-inform" auth sha "" priv aes ""

As I'm aware only SHA-1 and AES-128 are supported.

Best, Gorazd

thanks a lot. The problem was on the AES256, i dont know why was possible to configure and it dosent worked but i changed it and everything was ok.