Hi,
I have problem with a 4x 5800 IRF stack.
I want upgrade this stack with ISSU procedure for imcompatible firmware. But without success.
And i want upgrade again without ISSU, just the classic procedure with reboot all. But i have this error:
%Jul 10 17:31:06:963 2015 HP ISSU/3/SLAVE IMAGE ERR:
Error: The current boot file running on slave is not the specified boot file.
[HP]dis issu state
ISSU state: Load
Compatibility: Incompatible
Work State: Normal
Upgrade Method: Board by board
Previous version: R1808P22
Previous boot file is flash:/a5800_5820x-cmw520-r1808p22.bin
Upgrade version: R1809P09
Upgrade boot file is flash:/A5800_5820X-CMW520-R1809P09.bin
HOW i can disable the ISSU procedure under the member 3 without reboot all stack, for return in default state: "ISSU state: Init"
I have a second problem when i upgrade the bootrom of member:
<HP>bootrom update file A5800_5820X-CMW520-R1809P09.bin slot 1
This command will update bootrom file on the specified board(s), Continue? [Y/N]:y
Now updating bootrom, please wait...
Extend BootRom Version is not equal,updating? [Y/N]y
Basic BootRom Version is not equal,updating? [Y/N]y
<HP>bootrom update file A5800_5820X-CMW520-R1809P09.bin slot 3
This command will update bootrom file on the specified board(s), Continue? [Y/N]:y
Now updating bootrom, please wait...
Failed to update bootrom of Board 3.
<HP>bootrom update file A5800_5820X-CMW520-R1809P09.bin slot 2
This command will update bootrom file on the specified board(s), Continue? [Y/N]:y
Now updating bootrom, please wait...
Failed to update bootrom of Board 2.
What it's fail for member 2 and 3?
Thanks a lot, i very important and urgent.
#UpgradeISSU