Comware

Finally I can setup intervlan routing on single switch 4500G, thanks to Fred for pointing me some light.

Now I facing another weird issue, here is the scenario :

1. Got my 4500G, set port #1 to VLAN 1 with vlan interface 192.168.10.43

2. Set port #2 to VLAN 2 with vlan interface 192.168.16.43

3. PC A connected to port #1 (VLAN 1) with IP 192.168.10.100

4. PC B connected to port #2 (VLAN 2) with IP 192.168.16.100

5. Both PC are directly connected to the switch

When I do pinging from PC A to switch, I got following result :

Reply from 192.168.10.43: bytes=32 time=1ms TTL=255

But, (here comes the problem), when I do pinging from PC B to switch, I got different result :

Reply from 192.168.16.43: bytes=32 time=205ms TTL=225

Even sometimes I got 550ms...

Is this problem related to VLAN setting again ?

Update: typo in PC B ip address - thanks Fred

Finally I can setup intervlan routing on single switch 4500G, thanks to Fred for pointing me some light.

Now I facing another weird issue, here is the scenario :

1. Got my 4500G, set port #1 to VLAN 1 with vlan interface 192.168.10.43

2. Set port #2 to VLAN 2 with vlan interface 192.168.16.43

3. PC A connected to port #1 (VLAN 1) with IP 192.168.10.100

4. PC B connected to port #2 (VLAN 2) with IP 192.168.16.100

5. Both PC are directly connected to the switch

When I do pinging from PC A to switch, I got following result :

Reply from 192.168.10.43: bytes=32 time=1ms TTL=255

But, (here comes the problem), when I do pinging from PC B to switch, I got different result :

Reply from 192.168.16.43: bytes=32 time=205ms TTL=225

Even sometimes I got 550ms...

Is this problem related to VLAN setting again ?

Update: typo in PC B ip address - thanks Fred

Are you sure that the address of the host that is connected to VLAN B is right? It's the same address of its gateway (VLAN Interface 2: 192.168.16.43). If you are using this address, you have to change it to a different IP from the gateway, but in the same network segment, because you are actually pinging the localhost, not the switch.

Regards

Ups, sorry about my typo

PC B ip address is 192.168.16.100 because ip 192.168.16.43 already assign to interface vlan 2 on switch.