Comware

Hello,

Could you please help me configure VLAN on HP OfficeConnect 1920s enterprise POE switch?

Network has a tagged VLan say 10,15,20 and connected to Port 1.
How can I map VLan 10 on port 10, VLan 15 on port 15, VLan 20 on port 20 ?

I have tried a lot but didn't managed it to work.

Thanks in advance,
George

Hello

On following link you can find the configuration guide for your switch:

You should read chapter 5: Virtual LAN  :)

Hope that helped

HP-Browniee,

Thanks for reply. I read manual, and I'm writing here because I did as described there but failed to receive any packets at the router side. That is why I'm writing here for sample configuration.

Regards,

George

Can you show how you configured your switch and router?

Hello,

I hope this helps, one way of doing it.

- In the network, if you have VLAN's 10, 15 and 20
- Suppose, there are 3 clients which has to be part of each VLAN
- Client A (port number 10) untagged for VLAN 10
- Client B (port number 15) untagged for VLAN 15
- Client C (port number 20) untagged for VLAN 20
- If port 1 is uplink in the network

Click on port membership under VLAN tab
- From VLAN ID select VLAN 10, then select the port i.e., port 10
- Click EDIT option, Under Participation select Include option and make sure untagged is selected under Tagging option then APPLY
- Select port 1, click on EDIT
- Under participation select to Include and Under Tagging select Tagged

- From VLAN ID select VLAN 15, then select the port i.e., port 15
- Click EDIT option, Under Participation select Include option and make sure untagged is selected under Tagging option then APPLY
- Select port 1, click on EDIT
- Under participation select to Include and under Tagging select Tagged

- From VLAN ID select VLAN 20, then select the port i.e., port 20
- Click EDIT option, Under Participation select Include option and make sure untagged is selected under Tagging option then APPLY
- Select port 1, click on EDIT
- Under participation select to Include and under Tagging select Tagged

Click on Save Configuration

Thank you

I am a HPE employee

sskg Thanks,

I have different names but finally I did it!

Best,

George

Hello there, happy new year for everyone.

I have a problem. I made the exactly same configuration but it did'nt work i can not ping through other vlans ...

My switch is a HPE OfficeConnect 1920S 24G 2SFP PoE+ (370W) JL385A

Thank you

Im a student in network and telecommunications

Did you solve the problem? i have the same situation. On port 24 (Uplink) i configure vlan1 as untagged, vlan25 and vlan20 as tagged. the other switch is an HPE 5500, i configure untagged vlan1 and tagged vlan25 and vlan20, i can ping vlan 1 the other vlans not passed on uplink port.