Comware

 View Only
Back to discussions
Expand all | Collapse all

3Com 5500G-EI (3CR17254-91) need help setting up HTTPS

This thread has been viewed 1 times

  • 1.  3Com 5500G-EI (3CR17254-91) need help setting up HTTPS

    Posted Apr 17, 2014 07:59 PM

    I'm having a devil of a time setting up HTTPS and I don't know what all is the minimum steps. I've downloaded tons of manuals but none have a process that I can get working. I have http, and ssh access but I can't get https to stay started.

     

    So far the most I can figure out is I need to do this: (From Fundamentals Configuration Guide-R2220.pdf)

     

    system-view
ip https ssl-server-policy policy-name
ip https enable
ip https certificate-access-control-policy policy-name
ip https port port-number      # this command isn't available on my firmware
ip https acl acl-number
local-user user-name
password [ [hash] {cipher | simple} password ]
authorization-attribute level level
service-type web        #this service type isn't available on my firmware, I'm guessing it's lan-access
quit

     

    I've done what I think I can with the commands available on my firmware but I get the results below:

     

    [MF-3Com-5500G-EI]ip https enable
Info: HTTPS server has been started!
[MF-3Com-5500G-EI]display ip https
SSL server policy: sslsvr
Certificate access-control-policy: 3com5500g-acl-1
Basic ACL: 2000
Operation status: Stopped
[MF-3Com-5500G-EI]

     

     

     

    The thing is I don't know anything about pki, ssl, or the access-control-policy piece. Does anyone have a way I can set this up with a local certificate and how I go about generating that cert? I need full details on what I should be doing with the pki and ssl commands.

     

    So far here was the config items I was playing with but I'm sure aren't valid to make it work: (from my current config)

     

     

    #
.
.
.
#
pki domain 3com-5500g
ca identifier 3com-5500g.local.dom
#
pki certificate attribute-group everything
attribute 1 subject-name ip ctn .
#
ssl server-policy sslsvr
pki-domain 3com-5500g
#
local-user Admin
service-type lan-access
service-type ssh telnet terminal
level 3
service-type ftp
password-control length 7
#
acl number 2000
rule 1 permit source 0.0.0.0 192.168.1.255
rule 2 permit source 192.168.1.0 0.0.0.255
#
.
.
.
#
ip http acl 2000
#
ip https ssl-server-policy sslsvr
#
ip https certificate access-control-policy 3com5500g-acl-1
#
ip https acl 2000
#
ip https enable
#
ssh-server source-ip 192.168.1.252
ssh server authentication-retries 5
ssh user Admin authentication-type password
ssh user Admin service-type all
#
user-interface aux 0 7
authentication-mode password
set authentication password cipher *removed*
user-interface vty 0 4
acl 2000 inbound
authentication-mode scheme
set authentication password cipher *removed*
#
return

     I appreciate any help anyone can give, let me know if you need any additional information

     

    Thanks

     

     

    P.S. This thread has been moved from Legacy to Comware-Based. -HP Forum Moderator

     


    #certificate


  • 2.  RE: 3Com 5500G-EI (3CR17254-91) need help setting up HTTPS

    Posted Apr 23, 2014 04:15 AM

    Hi David

     

    https with Comware 3 and early versions of Comware 5 is a pain .... don't use it if you don't need it. You need a external CA with an SCEP Plugin, which allow to automaticly asign a cert from the switch to the ca. It works.

     

    Here you will find a How to:

    http://hpnetworkers.blogspot.ch/2012/02/hp-series-h3c-comware-https-howto-with.html

     

    Since later Comware 5 and Comware 7 the Switch can use a self-assigned cert for its https interface.

     

    br

    Manuel



Related Content