Comware

Hi i'm new to this fourum. Have 2 X JG898A in IRF & I use the web & update software using the web UI

Recentely i updated to Release 2432P06 & flash used 67% & fee 33%. Do i need to free up some sapce on flash for next update ? How fo i clear some space ? Soory i'm new to this switches so please help ? 

Cheers

/R

<JG898A>dir

Directory of flash:

   0 -rw-    11504640 Aug 05 2016 16:00:00   5700-cmw710-boot-r2422p02.bin

   1 -rw-    11868160 Jan 01 2011 01:38:29   5700-cmw710-boot-r2432p03.bin

   2 -rw-    11881472 Dec 06 2017 10:54:40   5700-cmw710-boot-r2432p05.bin

   3 -rw-    11881472 Aug 12 2018 08:51:51   5700-cmw710-boot-r2432p06.bin

   4 -rw-    69215232 Aug 05 2016 16:00:00   5700-cmw710-system-r2422p02.bin

   5 -rw-    76857344 Jan 01 2011 01:41:00   5700-cmw710-system-r2432p03.bin

   6 -rw-    76951552 Dec 06 2017 10:57:13   5700-cmw710-system-r2432p05.bin

   7 -rw-    76964864 Aug 12 2018 08:54:24   5700-cmw710-system-r2432p06.bin

   8 drw-           - Jan 01 2011 00:06:18   diagfile

   9 -rw-         735 Jan 01 2011 01:08:34   hostkey

  10 -rw-        2745 Aug 16 2018 08:59:05   ifindex.dat

  11 drw-           - Jan 01 2011 00:24:57   license

  12 drw-           - Jan 01 2011 00:03:09   logfile

  13 drw-           - Jan 01 2011 01:19:17   pki

  14 drw-           - Jan 01 2011 00:06:18   seclog

  15 -rw-         591 Jan 01 2011 01:08:35   serverkey

  16 -rw-        8686 Aug 16 2018 08:59:06   startup.cfg

  17 -rw-      180566 Aug 16 2018 08:59:07   startup.mdb

  18 drw-           - Aug 12 2018 09:03:02   versionInfo

Hello, provided that you already have updated both main and backup images on your HPE FlexFabric 5700 32XGT 8XG 2QSFP+ Switch (JG898A)...a thing you can surely do to free up flash space for future updates is to (permanently) delete - where permanently means not just trashing into the Flash's trash can but definitely delete - old and no more used Systema and Boot bin files:

• 5700-cmw710-boot-r2422p02.bin
• 5700-cmw710-boot-r2432p03.bin
• 5700-cmw710-boot-r2432p05.bin
• 5700-cmw710-system-r2422p02.bin
• 5700-cmw710-system-r2432p03.bin
• 5700-cmw710-system-r2432p05.bin

preserving only actually loaded/used System and Boot files:

• 5700-cmw710-boot-r2432p06.bin
• 5700-cmw710-system-r2432p06.bin

Hi Thanks for your reply. How to delete this files please? If i delete via SSH (IRF IP) will it deleted from node 1 & 2 ? 

Do you know the commands please 

Hi looks like i don't have any on backup ? is this good or bad ? Do i need r2432p05 in backup?  Is it a must ? & How do i do this pls ?

If i decided not to go with backup i can delete all apart from r2432p06 files yes?

using  delete /unreserved flash:/<filename> 

<JG898A>display boot
Software images on slot 1:
Current software images:
flash:/5700-cmw710-boot-r2432p06.bin
flash:/5700-cmw710-system-r2432p06.bin
Main startup software images:
flash:/5700-cmw710-boot-r2432p06.bin
flash:/5700-cmw710-system-r2432p06.bin
Backup startup software images:
None
Software images on slot 2:
Current software images:
flash:/5700-cmw710-boot-r2432p06.bin
flash:/5700-cmw710-system-r2432p06.bin
Main startup software images:
flash:/5700-cmw710-boot-r2432p06.bin
flash:/5700-cmw710-system-r2432p06.bin
Backup startup software images:
None
<JG898A>

Yes correct.

You want to have a backup file in case your main file gets corrupt or somthing like that. In that case you always have a fast backup software at hand. You can load it the same way you did with the main file, but instead of the keyword main you can use the keyword backup in CLI.

I dont know the GUI that good, but i assume there will also be a backup section under software upgrade.

Hi Guys thanks for this i have done this on memeber id 1 (Master) and have plenty free space. How fo i do this on memeber id 2 (Subordinate) please which is stll have the old files. (I only have 2 in my IRF) 

Cheers

/R

Found it thanks for your help guys 

delete /unreserved slot2#flash:/xxxx